Allparts

Pickup cover set for Strat ® (3 pcs.), plastic. Allparts #PC-0406. 

Dome knobs (2), Gotoh VK1-19 with set screw, fits USA split shaft pots (6mm), 23/32" tall x 3/4" wide.      

500K ohm push/pull audio taper potentiometer, with nut and washer.

Humbucking pickup mounting screws (4), phillips, with springs (4), #3 - 48 x 1-1/4". Bulk packs do not include springs (see GS-0038).

CURVED NECK AND BRIDGE HUMBUCKING PICKUP RING SET The curved Humbucking Pickup Ring Set is a great replacement for your famous curved top guitars (...

Plastic bridge pins with dot, slotted (50 pcs.).

Compensated bone saddle for acoustic guitar, radiused top 3" x 7/64" x 11/32.

String guides (2) wavy style, with screws and spacers for guitar.

SWITCHCRAFT® 11 LONG THREAD INPUT JACK This variant of the Switchcraft #11 input jack features the longer thread-column preferred for guitars with ...

Metric short straight 3-way toggle switch commonly used as a pickup selector switch for dual pickup thinner body electric guitars.  

SWITCHCRAFT® 3-CONDUCTOR END PIN JACK Switchcraft® stereo end pin jack with housing. Easily tighten the housing from inside the guitar for a simple...

Sprague "Orange Drop" #715P .047 mfd 200 volt capacitors (3 pcs.).

Bone nut blank 2-1/8" x 15/32" x 1/4".

Reflector volume knobs set of 2 or bulk pack of 50, fits USA split shaft pots. Available in gold and black.

Tremolo springs (3 pcs.).

3-Way Oak blade switch, with stainless steel screws.

Rhythm/Treble switch washer for toggle switch.

Set of humbucking pickup rings for neck and bridge pickups. Flat bottom and slanted sides. Allparts #PC-0743. 

Vintage style pickguard for Telecaster®.  Fits USA spec Fender®.  Not compatible with Squire®.   Specifications 1-ply  0.060" thick (clear, miror,...

On-On slide switch, Switchcraft, for Jazzmaster ® & Jaguar ®, with screws.

Reflector tone knobs (2), fits USA split shaft pots.

Bone saddle for acoustic guitar, 4-1/8" x 1/8" x 7/16".

Tremolo spring cover, fits standard USA Strat ® spec.

Strap button    New and unique solid one-piece strap button in hardened steel with self-tapping wood thread. Simply screw it on with an Allen key (...

Gibson ® style strap buttons (2) with screws, Gotoh.

Brass sleeves - convert split shaft pot to solid shaft pot (5 pcs.).

Bone nut for Epiphone ® guitars with string slots, 1-11/16" x 1/4" x 3/8".

Rectangular jack plate with slight curve. Hole diameter 3/8".

500K ohm linear pot for tone, CTS, split, knurled shaft, with hardware.

SWITCHCRAFT® RIGHT ANGLE TOGGLE - MFG# 12013X   Heavy-duty 3-way pickup selector switch for SG Guitars. Switchcraft® has been used by Gibson® and o...

Pickup mounting screws (8 pcs.) for bass, 1-1/4" long.

Set of two humbucking pickup rings for neck and bridge. Flat bottom and straight sides. Part number PC-0745   

1/4" input jack, stereo, Switchcraft #12B, with nut and washer.

The original Rotomatics® with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears pro...

Bass string guide round with screw, Gotoh.

ECONOMY STRAP BUTTONS The Economy Strap Buttons are a great replacement for the Schaller Strap Lock System. There are 2 pieces that come in a bag. ...

Gotoh tunematic, large mounting holes, 2-1/16" string spacing, 2-29/32" post spacing.

Bone nut blank 2-1/16" x 3/8" x 1/4" slant cut.

500K ohm mini pot, audio taper, split knurled shaft (coarse spline), with nut & washer.

Dunlop Dual Design strap lock system (2), push to release.

Set of humbucking pickup covers, nickel-silver, 1-15/16" string spacing.

SWITCHCRAFT® STRAIGHT TOGGLE SWITCH Commonly used as a Pickup selector switch for thicker-body, 2-pickup Gibson® models like the Les Paul, the Swit...

Classical tuning keys, with square White plastic buttons, 14:1, 1-3/8" spacing.

Nut blocks (3) for Floyd Rose ® or Schaller locking nuts, with screws. 

Pickguard with adhesive backing for acoustic guitar.

22 Gauge stranded wire, 25 feet.

SWITCHCRAFT® 1/4" MONO LONG THREADED JACK Long threaded barrel input jack, mono, Switchcraft, with nut and washer.  Specifications:• 2 Conductor• T...

String ferrules (6 pcs.) for guitar, vintage reproduction, with lip, 5/16".